[Linux-cluster] Post-Join Delay?

[Martin Fuerstenau]

Hi,

this is from my cluster.conf:

	<fence_daemon post_fail_delay="420" post_join_delay="600"/>
It works well for me. The problem with the defaults is that an upcoming
node is fenced before it is completely up

Yours
Senior System Engineer

Océ Printing Systems GmbH
On Mon, 2009-03-16 at 16:43 +0000, kali mero wrote:
> Hi all,
> 
> While I was reading the documentation I came across an awkward
> statement:
> 
> "The Post-Join Delay parameter is the number of seconds the fence
> daemon (fenced) waits before fencing a node after the node joins the
> fence domain. The Post-Join Delay default value is 3. A typical
> setting for Post-Join Delay is between 20 and 30 seconds, but can vary
> according to cluster and network performance."
> 
> I usually leave this in the default value, but the docs refer to
> something in between 20 and 30.
> 
> So, what are your usually settings for this parameters?
> What is your recommendation?
> 
> TIA
> --
> Linux-cluster mailing list
> Linux-cluster at redhat.com
> https://www.redhat.com/mailman/listinfo/linux-cluster
Martin Fürstenau
Senior System Engineer

Océ Printing Systems GmbH
Siemensallee 2
85586 Poing, Germany
Direct Dial   +49-(0)8121-72-4684
Direct Fax    +49-(0)8121-72-4996
mailto: martin.fuerstenau at oce.com

Executive Office: André Mittelsteiner, Manfred Maier

Registered Office: Poing, Landkreis Ebersberg – Commercial Register
München: HRB 113205 - WEEE-Reg.-Nr. DE 88805443




This message and attachment(s) are intended solely for use by the addressee and may contain information that is privileged, confidential or otherwise exempt from disclosure under applicable law.

If you are not the intended recipient or agent thereof responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.

If you have received this communication in error, please notify the sender immediately by telephone and with a 'reply' message.

Thank you for your co-operation.