I clearly remember my first interaction with Linux. I was a technical trainer at the time. My experience, courses, and certifications revolved around Mac OS X and Windows Server. The company owner sent an email to the entire training department asking for someone to begin investigating Linux. I was the only trainer that stepped forward. A few weeks later, I was attempting to get a Linux distribution installed on one of the computers in the back of my classroom. These were the days of the "smoke error" if you got the monitor's vertical refresh rate wrong, etc. It took me several attempts to complete the installation, but finally, the machine booted, I signed in with my name and password, and the bash prompt flashed at me.
And I knew no commands.
Sometimes those that are new to Linux just need a few things to get them started. We all had to learn basic commands such as ls
, ifconfig
, hostname
, cd
, chmod
, and so forth. However, the next step comes in knowing the commands that will make a practical difference in your sysadmin life. I've collected several of my favorite commands below. Most of these are very fundamental commands, but using them effectively keeps me efficient.
Restart services
We all know it—if you change a configuration file, you must restart the service so that it becomes aware of the change. These days, we typically use systemctl
to manage services, but I've also included the older service
command below:
# systemctl restart daemon
# service daemon restart
Storage space
Storage space seems to be an eternal struggle for admins. There are two different but related commands that can help you understand your storage utilization: du
and df
. I always add the -h
option to them both. Doing so displays the storage capacity output in a "human-friendly" way (such as GBs or TBs).
# du -h /var/log
# df -h
Ping for device reboot status
Often, when updating servers, applying security patches, or installing software, the device must be rebooted for the configuration to continue. If you're in the habit of managing your servers remotely (and you should be!), it can be difficult to tell when a server has completed its reboot and is ready for you to reestablish an SSH connection. This is a great opportunity to use ping
. We usually rely on ping
as a troubleshooting tool to confirm or deny whether a remote host is available. This is the same idea, but you're using it to inform you when a remote host begins responding to ping
requests again (and therefore has completed its reboot).
# ping 10.1.0.11
Note: You can use this trick with Windows by running a continuous ping: ping -t 10.1.0.11
[ You might also like: 10 basic Linux commands you need to know ]
Use grep with other commands
Of course, grep
is an incredibly handy utility. One of the best ways to use grep is in conjunction with other commands, such as ls
or ps
. By piping the output of these commands into grep
, you can easily display the information you need. Use the -i
option to ignore case when matching a string.
# ls -l | grep rwx
# ls -l | grep -i .conf
# ps ef | grep sshd
Display the network around you
Displaying the devices available on the network around you is helpful for troubleshooting or understanding server roles. The nmap
utility is incredibly powerful, with a great many options. However, even a basic nmap
scan is useful and not difficult to remember. Here are a few examples.
A scan of your computer to learn about network services and ports:
# nmap localhost
A basic ping scan to identify the surrounding hosts:
# nmap -sp 10.1.1.0/24
A basic scan to identify a specific host:
# nmap -sp 10.1.1.99
Append information
The following redirection operator is incredibly helpful. While you can use the single >
character to redirect the output of a command to a file, the >>
operator appends the output to any data that might already exist in the file. The redirect operator (>
) overwrites any existing content.
# du -h /var/log >> host-info.txt
# ps ef | grep sshd >> host-info.txt
# nmap -sp localhost >> host-info.txt
Notice that I have begun some basic system documentation using commands we already viewed in the three command examples above.
Note: Over the years, I have recommended to students that they don't even bother to use the >
basic redirector at all. The >>
append redirector is safer, and works fine even if the destination file is empty.
Other results to append:
# date >> host-info.txt
# hostname >> host-info.txt
# ip addr >> host-info.txt
# uname -a >> host-info.txt
View information with cat and tail
The cat
command displays the contents of a file. Whether it be configuration files, logs, or user documents, sysadmins spend a lot of time viewing file contents. The cat
command is great for this.
# cat host-info.txt
Don't forget to use | less
to break long output into manageable pages:
# cat /etc/rsyslog.conf | less
Another excellent command for displaying information is tail
. It displays the last lines of a file. Most of us use tail
when viewing log files because the most recent log entries will be at the bottom of the file.
# tail /var/log/secure
Don't forget the related head
command, which displays the top of a file.
[ Get this free ebook: Managing your Kubernetes clusters for dummies. ]
Vim tips
In this next section, I freely admit that I'm going to cheat. Up to this point, I have shown one or maybe two related commands per section. This section covers Vim (which is arguably one of my favorite commands). More specifically, however, I show several tricks inside Vim that make my life easier.
Use the Esc key
Vim can be confusing to new Linux users. One secret of success that I pass on to my students when introducing Vim is this: If you're ever confused about which of the Vim modes you're in (Command, Execute, Insert), press the Esc key several times. That gets you back to the "home base" of Command mode. From there, you can use : for Execute mode or i for Insert mode.
Display line numbers
You can cause Vim to display line numbers by using the following Execute mode command:
:set number
Line numbers now appear along the left side of the file. You can make this setting permanent by editing the ~/.vimrc
file.
There are many other configurations you can set, including syntax checking and highlighting the current line. Visit the Vim documentation for ideas.
Jump to the bottom, top, or specific line of a file
Many configuration files are long, and you may need to use Vim to enter content at the bottom of the file. The uppercase G key in Command mode jumps you to the end of the file. Typing gg jumps you to the top of the file. These two navigation tricks can save you a lot of time.
You can also jump to a specific line number in a file. Do so by typing 42G in Command mode to jump to line 42. This is a great example of when the :set number value discussed above helps.
Keyword searches
You can keyword search in Vim by using a forward slash (/) and then typing the desired string. Do this while in Command mode.
/hosts
The above example searches for the string hosts in the file. Use n and N to jump to instances of the string.
Note: Here is a great article from Ricardo Gerardi on How to use Ansible to configure Vim.
Wrap up
This is certainly not an exhaustive list of useful Linux commands. The list does, however, represent tips and tricks that I've found helpful over the years. Many sysadmins have contributed ideas, useful commands, and creative ways of using Linux functionality to Enable Sysadmin, so be sure to look for more articles that will make you more efficient.
執筆者紹介
Damon Garn owns Cogspinner Coaction, LLC, a technical writing, editing, and IT project company based in Colorado Springs, CO. Damon authored many CompTIA Official Instructor and Student Guides (Linux+, Cloud+, Cloud Essentials+, Server+) and developed a broad library of interactive, scored labs. He regularly contributes to Enable Sysadmin, SearchNetworking, and CompTIA article repositories. Damon has 20 years of experience as a technical trainer covering Linux, Windows Server, and security content. He is a former sysadmin for US Figure Skating. He lives in Colorado Springs with his family and is a writer, musician, and amateur genealogist.
チャンネル別に見る
自動化
テクノロジー、チームおよび環境に関する IT 自動化の最新情報
AI (人工知能)
お客様が AI ワークロードをどこでも自由に実行することを可能にするプラットフォームについてのアップデート
オープン・ハイブリッドクラウド
ハイブリッドクラウドで柔軟に未来を築く方法をご確認ください。
セキュリティ
環境やテクノロジー全体に及ぶリスクを軽減する方法に関する最新情報
エッジコンピューティング
エッジでの運用を単純化するプラットフォームのアップデート
インフラストラクチャ
世界有数のエンタープライズ向け Linux プラットフォームの最新情報
アプリケーション
アプリケーションの最も困難な課題に対する Red Hat ソリューションの詳細
オリジナル番組
エンタープライズ向けテクノロジーのメーカーやリーダーによるストーリー
製品
ツール
試用、購入、販売
コミュニケーション
Red Hat について
エンタープライズ・オープンソース・ソリューションのプロバイダーとして世界をリードする Red Hat は、Linux、クラウド、コンテナ、Kubernetes などのテクノロジーを提供しています。Red Hat は強化されたソリューションを提供し、コアデータセンターからネットワークエッジまで、企業が複数のプラットフォームおよび環境間で容易に運用できるようにしています。
言語を選択してください
Red Hat legal and privacy links
- Red Hat について
- 採用情報
- イベント
- 各国のオフィス
- Red Hat へのお問い合わせ
- Red Hat ブログ
- ダイバーシティ、エクイティ、およびインクルージョン
- Cool Stuff Store
- Red Hat Summit